Red Hat Security Advisory: kernel security, bug fix, and enhancement update
🔗 CVE IDs covered (22)
📋 Description
CVE-2026-64541 — kernel: net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket CVE-2026-68451 — kernel: s390/zcrypt: Validate length for CCA ECC private key requests CVE-2026-68452 — kernel: s390/zcrypt: Validate length for CCA AES cipher key requests CVE-2026-68470 — kernel: wifi: mac80211: validate extension-frame layout before RX CVE-2026-72003 — kernel: wifi: brcmfmac: cyw: fix heap overflow on a short auth frame CVE-2026-72298 — kernel: net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post() CVE-2026-74446 — kernel: drm/amdkfd: hold event_mutex while checkpointing CRIU events CVE-2026-74480 — kernel: net: bridge: stop fast-leave after deleting a port group CVE-2026-74493 — kernel: net/smc: fix socket use-after-free during link group termination CVE-2026-80792 — kernel: ipv6: fix use-after-free in ip6_finish_output2() CVE-2026-97422 — kernel: drm/amdkfd: fix SMI event cross-process information leak CVE-2026-97425 — kernel: drm/amdgpu: fix buffer overflow during vBIOS update CVE-2026-97427 — kernel: drm/amd/pm: bound pp_dpm_set_pp_table() memcpy CVE-2026-97493 — kernel: drm/amdgpu: Bound GPIO I2C table entry count from VBIOS CVE-2026-97494 — kernel: drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw CVE-2026-97495 — kernel: drm/amdkfd: Check bounds on allocate_doorbell CVE-2026-97496 — kernel: drm/amdkfd: Fix OOB memory exposure in get_wave_state() CVE-2026-97497 — kernel: drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id CVE-2026-98116 — kernel: ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF CVE-2026-98741 — kernel: ALSA: ua101: reject mismatched capture/playback packet sizes CVE-2026-99032 — kernel: net/smc: protect clcsock lifetime in smc_getname CVE-2026-99283 — kernel: kernel: Denial of Service via premature connection tracking expiration on TCP RST packets
🎯 Affected products200
- Red Hat Enterprise Linux AppStream (v. 10)
- Red Hat Enterprise Linux BaseOS (v. 10)
- Red Hat Enterprise Linux CodeReady Linux Builder (v. 10)
- Red Hat Enterprise Linux Real Time (v. 10)
- Red Hat Enterprise Linux Real Time for NFV (v. 10)
- kernel-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-0:6.12.0-264.17.1.el10_3.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-0:6.12.0-264.17.1.el10_3.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-0:6.12.0-264.17.1.el10_3.src as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-0:6.12.0-264.17.1.el10_3.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-core-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-debug-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-debug-core-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-debug-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 10)
- kernel-64k-debug-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-debug-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux CodeReady Linux Builder (v. 10)
- kernel-64k-debug-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux Real Time (v. 10)
- kernel-64k-debug-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux Real Time for NFV (v. 10)
- kernel-64k-debug-devel-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 10)
- kernel-64k-debug-devel-matched-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 10)
- kernel-64k-debug-modules-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-debug-modules-core-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-debug-modules-extra-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 10)
- kernel-64k-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 10)
- kernel-64k-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux CodeReady Linux Builder (v. 10)
- kernel-64k-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux Real Time (v. 10)
- kernel-64k-debuginfo-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux Real Time for NFV (v. 10)
- kernel-64k-devel-0:6.12.0-264.17.1.el10_3.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 10)
- +170 more not shown
✅ Remediation
For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 The system must be rebooted for this update to take effect. Red Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture. Because of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available. Workaround: Mitigation for this issue is either not available or the currently available options don't meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability. Workaround: To mitigate this vulnerability, prevent the mac80211 kernel module from loading on systems where wireless functionality is not required. 1. Create a configuration file to prevent the module from loading: # echo "install mac80211 /bin/true" > /etc/modprobe.d/mac80211.conf 2. Unload the module if it is currently loaded: # modprobe -r mac80211 Caveats: Disabling mac80211 will disable all wireless network devices dependent on this subsystem. If the module is currently in use, unloading it will disrupt active wireless connections, or the unload command may fail, requiring a system restart for changes to take full effect. Workaround: To mitigate this vulnerability, prevent the brcmfmac kernel module from being loaded: 1. Create a configuration file to prevent loading the module: # echo "install brcmfmac /bin/true" >> /etc/modprobe.d/disable-brcmfmac.conf 2. If the module is currently loaded, unload it: # modprobe -r brcmfmac If the module is actively in use and cannot be unloaded dynamically, a system reboot is required for the change to take effect. Caveats: Disabling this module will disable wireless network connectivity for any devices that rely on the Broadcom FullMAC (brcmfmac) wireless driver. Workaround: To mitigate this vulnerability, prevent the Qualcomm IPC Router kernel module from loading: 1. Create a configuration file in /etc/modprobe.d to disable and blacklist the module: # echo "install qrtr /bin/true" > /etc/modprobe.d/disable-qrtr.conf # echo "blacklist qrtr" >> /etc/modprobe.d/disable-qrtr.conf 2. If the module is already loaded, attempt to unload it: # modprobe -r qrtr Warning and Caveats: Disabling or unloading the qrtr module will prevent Qualcomm IPC Router network communication and will disable features or hardware that rely on this protocol (such as Qualcomm modem devices or SoC communication channels). If the module is actively in use by running system processes or hardware interfaces, unloading it will fail, and a system reboot will be required for the configuration to take effect. Workaround: To mitigate this vulnerability, prevent the amdgpu kernel module from loading on systems where AMD GPU compute or display hardware is not required. 1. Blacklist the module by executing the following command as root: # echo "install amdgpu /bin/true" > /etc/modprobe.d/disable-amdgpu.conf 2. If the module is currently loaded into kernel memory, a system reboot is required to fully unload it, or attempt to unload it manually: # rmmod amdgpu Warning: Unloading the kernel module or rebooting the host will interrupt running services and terminate graphical sessions. Caveat: Disabling the amdgpu driver prevents hardware graphics acceleration and compute functionality on systems equipped with AMD Radeon or Instinct GPUs. Ensure alternative console access is available. Workaround: If bridge multicast snooping is not required, it can be disabled to prevent the vulnerable code path from being reached: ``` echo 0 > /sys/class/net/<bridge>/bridge/multicast_snooping ``` The br_multicast_leave_group() code path is only reachable when multicast snooping is active, so disabling it eliminates exposure to this flaw. Alternatively, avoid toggling multicast_to_unicast on bridge ports after it has been enabled. If multicast snooping is required, ensure that multicast_to_unicast is either left at its default (disabled) or, once enabled on a port, is not subsequently disabled while the port has active multicast group memberships. Workaround: Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base, or stability. Workaround: Blacklist the amdgpu kernel module to prevent it from loading on systems where AMD GPU hardware is not required: 1. Add the module to the blacklist configuration: # echo "blacklist amdgpu" >> /etc/modprobe.d/blacklist-amdgpu.conf 2. Prevent the module from being loaded: # echo "install amdgpu /bin/true" >> /etc/modprobe.d/blacklist-amdgpu.conf Caveat: Disabling the amdgpu driver prevents hardware display acceleration and compute capabilities on systems equipped with AMD GPUs. Warning: If the amdgpu module is already loaded in the running kernel, a system reboot is required for these configuration changes to take effect. Workaround: To mitigate this vulnerability on systems where audio capabilities are not required, disable the ALSA PCM kernel module (`snd-pcm`). 1. Prevent the module from loading by creating a modprobe configuration file: # echo "install snd-pcm /bin/true" > /etc/modprobe.d/disable-snd-pcm.conf 2. If the module is currently loaded, unload it: # modprobe -r snd-pcm Caveats: Disabling this module prevents audio hardware, playback, and recording from operating. Warning: Unloading the module will interrupt active audio processes. If the module is currently in use and cannot be unloaded, a system restart is required for the configuration to take effect.
🔗 References (25)
- selfhttps://access.redhat.com/errata/RHSA-2026:100661
- externalhttps://access.redhat.com/security/updates/classification/#important
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2507721
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2515351
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2515353
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2516285
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2516599
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2516679
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2516963
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2517046
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2517059
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2528542
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2540407
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2540425
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2540435
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2540448
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2540464
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2540475
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2540532
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2540554
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2541360
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2555081
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2559710
- externalhttps://bugzilla.redhat.com/show_bug.cgi?id=2568681
- selfhttps://security.access.redhat.com/data/csaf/v2/advisories/2026/rhsa-2026_100661.json