RHSA-2026:100517HighCVSS 8.8

Red Hat Security Advisory: kernel security update

Published
November 19, 2026
Last Modified
November 20, 2026

🔗 CVE IDs covered (16)

📋 Description

CVE-2021-47191 — kernel: scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() CVE-2021-47576 — kernel: scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select() CVE-2024-57849 — kernel: s390/cpum_sf: Handle CPU hotplug remove during sampling CVE-2026-52912 — kernel: netfilter: nf_queue: hold bridge skb->dev while queued CVE-2026-63829 — kernel: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink CVE-2026-63992 — kernel: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() CVE-2026-63994 — kernel: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmpv6 CVE-2026-68140 — kernel: net/iucv: fix use-after-free of a severed iucv_path CVE-2026-68155 — kernel: Linux kernel (libceph): Denial of Service due to malformed monitor maps CVE-2026-68156 — kernel: libceph: refresh auth->authorizer_buf{,_len} after authorizer update CVE-2026-68159 — kernel: Linux kernel: libceph stack out-of-bounds write via crafted OSDMap CVE-2026-68432 — kernel: vxlan: require CAP_NET_ADMIN in the device netns for changelink CVE-2026-72255 — kernel: netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst CVE-2026-74569 — kernel: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() CVE-2026-89481 — kernel: nvme-tcp: fix host memory disclosure on R2T for a read command CVE-2026-97417 — kernel: netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack()

🎯 Affected products52

  • Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • bpftool-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • bpftool-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • bpftool-debuginfo-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • bpftool-debuginfo-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-0:4.18.0-305.219.1.el8_4.src as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-0:4.18.0-305.219.1.el8_4.src as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-abi-stablelists-0:4.18.0-305.219.1.el8_4.noarch as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-abi-stablelists-0:4.18.0-305.219.1.el8_4.noarch as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-core-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-core-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-debug-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-debug-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-debug-core-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-debug-core-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-debug-debuginfo-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-debug-debuginfo-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-debug-devel-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-debug-devel-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-debug-modules-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-debug-modules-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-debug-modules-extra-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-debug-modules-extra-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-debuginfo-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-debuginfo-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • kernel-debuginfo-common-x86_64-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS AUS (v.8.4)
  • kernel-debuginfo-common-x86_64-0:4.18.0-305.219.1.el8_4.x86_64 as a component of Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)
  • +22 more not shown

✅ Remediation

For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 The system must be rebooted for this update to take effect. Red Hat recommends treating all kernel errata as security-relevant. Given the kernel's fundamental role, any bug has a higher chance of impacting system security, even if that impact only becomes clear after a fix is published. Therefore, Red Hat prioritizes delivering fixes that improve our customers' overall security posture. Because of this proactive approach, a patch may be associated with a CVE assignment at a future date. Retroactive CVE assignments are always documented in the corresponding errata and on Red Hat's CVE pages. We strongly advise against delaying updates, as doing so may leave your system exposed when protections are already available. Workaround: Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability. Workaround: Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base, or stability. Workaround: Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base, or stability. The upstream Linux kernel community recommends updating to a stable kernel release containing the fix (6.6.148, 6.12.101, 6.18.42, or 7.1.6 depending on the stable series); for Red Hat products, apply the kernel updates provided for the affected product streams. Workaround: To mitigate this vulnerability, prevent the `ceph` kernel module from loading if Ceph client functionality is not in use. Create a file `/etc/modprobe.d/ceph.conf` with `install ceph /bin/true`. If the module is currently loaded, unload it using `rmmod ceph`. A system reboot is required for the changes to take full effect and ensure the module is not reloaded. Unloading the `ceph` module will impact systems actively using Ceph client features. Workaround: If the system does not require the `libceph` module for Ceph cluster connectivity, prevent the `ceph` kernel module from loading by blacklisting it. Create a file `/etc/modprobe.d/ceph.conf` with the content `blacklist ceph`. After creating the file, regenerate the initramfs using `dracut -f -v` and reboot the system for the changes to take effect. If `libceph` is in use, restrict network access to Ceph monitors to trusted hosts through firewall rules to reduce the attack surface. Workaround: Prevent the nvme-tcp kernel module from loading if NVMe over TCP storage is not required on the system. 1. Add an entry to /etc/modprobe.d to prevent the module from loading: # echo "install nvme-tcp /bin/true" >> /etc/modprobe.d/disable-nvme-tcp.conf 2. If the module is currently loaded and not in use by any storage target, unload it: # modprobe -r nvme-tcp Caveats: Disabling this module prevents the system from connecting to NVMe over TCP block storage devices. Warning: Do not attempt to unload this module if active NVMe over TCP storage is mounted or in use, as doing so will cause I/O failure and potential data loss. If the module cannot be cleanly unloaded, a system restart is required for the change to take full effect. Additionally, restrict NVMe-oF connections to verified, trusted storage targets over isolated or encrypted network fabrics. Workaround: Systems that do not require stateful firewall, NAT, or connection tracking can eliminate exposure by unloading the nf_conntrack kernel module. On systems where conntrack is required, exposure can be reduced by applying NOTRACK rules in the raw table to bypass connection tracking on untrusted or internet-facing interfaces, ensuring the vulnerable TCP SACK parsing code path in tcp_sack() is not reached for attacker-controlled traffic.

🔗 References (19)