CWE-1188— Insecure Default Initialization of Resource

frysk packages through 2008-08-05 as shipped in Red Hat Enterprise Linux 5 are built with an insecure RPATH set in the ELF header of multiple binaries in /usr/bin/f* (e.g. fcore, fcatch, fstack, fstep, ...) shipped in the package. A local …

makepasswd 1.10 default settings generate insecure passwords

The default configuration of broker.conf in Red Hat OpenShift Enterprise 2.x before 2.1 has a password of "mooo" for a Mongo account, which allows remote attackers to hijack the broker by providing this password, related to the openshift.s…

A vulnerability in the use of JSON web tokens by the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to gain administrative access to an affected system. The vulnerabil…

A vulnerability in Cisco Meeting Server (CMS) could allow an unauthenticated, adjacent attacker to access services running on internal device interfaces of an affected system. The vulnerability is due to incorrect default configuration of …

A vulnerability in Sierra Wireless AirLink GX400, GX440, ES440, and LS300 routers with firmware before 4.4.7 and GX450, ES450, RV50, RV50X, MP70, and MP70E routers with firmware before 4.9.3 could allow an unauthenticated remote attacker t…

Martem TELEM GW6/GWM versions prior to 2.0.87-4018403-k4 may allow unprivileged users to modify/upload a new system configuration or take the full control over the RTU using default credentials to connect to the RTU.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability.

Arris Touchstone Telephony Gateway TG1682G 9.1.103J6 devices are distributed by some ISPs with a default password of "password" for the admin account that is used over an unencrypted http://192.168.0.1 connection, which might allow remote …

IBM Maximo Asset Management 7.6 through 7.6.3 installs with a default administrator account that a remote intruder could use to gain administrator access to the system. This vulnerability is due to an incomplete fix for CVE-2015-4966. IBM …

Router Default Credentials in Kraftway 24F2XG Router firmware version 3.5.30.1118 allow remote attackers to get privileged access to the router.

GitHub Electron 1.7.15, 1.8.7, 2.0.7, and 3.0.0-beta.6, in certain scenarios involving IFRAME elements and "nativeWindowOpen: true" or "sandbox: true" options, is affected by a WebPreferences vulnerability that can be leveraged to perform …

LINK-NET LW-N605R devices with firmware 12.20.2.1486 allow Remote Code Execution via shell metacharacters in the HOST field of the ping feature at adm/systools.asp. Authentication is needed but the default password of admin for the admin a…

Lobby Track Desktop contains default administrative credentials. An attacker could exploit this vulnerability to gain full access to the application.

eVisitorPass contains default administrative credentials. An attacker could exploit this vulnerability to gain full access to the application.

Philips iSite and IntelliSpace PACS, iSite PACS, all versions, and IntelliSpace PACS, all versions. Default credentials and no authentication within third party software may allow an attacker to compromise a component of the system.

The BluStar component in Mitel InAttend before 2.5 SP3 and CMG before 8.4 SP3 Suite Servers has a default password, which could allow remote attackers to gain unauthorized access and execute arbitrary scripts with potential impacts to the …

An issue was discovered on Cerner Connectivity Engine (CCE) 4 devices. The user running the main CCE firmware has NOPASSWD sudo privileges to several utilities that could be used to escalate privileges to root. One example is the "sudo ln …

Safe Software FME Server through 2018.1 creates and enables three additional accounts in addition to the initial administrator account. The passwords to the three accounts are the same as the usernames, which are guest, user, and author. L…

In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Mobile and Snapdragon Wear MDM9206, MDM9607, MDM9635M, MDM9650, MDM9655, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD…

Installation tool IPDT (Intel Processor Diagnostic Tool) 4.1.0.24 sets permissions of installed files incorrectly, allowing for execution of arbitrary code and potential privilege escalation.

In Elastic Cloud Enterprise (ECE) versions prior to 1.1.4 a default master encryption key is used in the process of granting ZooKeeper access to Elasticsearch clusters. Unless explicitly overwritten, this master key is predictable across a…

An issue was discovered on Tenda AC15 devices. A remote, unauthenticated attacker can make a request to /goform/telnet, creating a telnetd service on the device. This service is password protected; however, several default accounts exist o…

dcc_curr_list is initialized with a default invalid value that is expected to be programmed by the user through a sysfs node which could lead to an invalid access in all Android releases from CAF (Android for MSM, Firefox OS for MSM, QRD A…

The defaults settings for the CORS filter provided in Apache Tomcat 9.0.0.M1 to 9.0.8, 8.5.0 to 8.5.31, 8.0.0.RC1 to 8.0.52, 7.0.41 to 7.0.88 are insecure and enable 'supportsCredentials' for all origins. It is expected that users of the C…

doorGets 7.0 has a default administrator credential vulnerability. A remote attacker can use this vulnerability to gain administrator privileges for the creation and modification of articles via an H0XZlT44FcN1j9LTdFc5XRXhlF30UaGe1g3cZY6i1…

The Voo branded NETGEAR CG3700b custom firmware V2.02.03 uses the same default 8 character passphrase for the administrative console and the WPA2 pre-shared key. Either an attack against HTTP Basic Authentication or an attack against WPA2 …

An issue was discovered in Alfresco Community Edition versions 6.0 and lower. An unauthenticated, remote attacker could authenticate to Alfresco's Solr Web Admin Interface. The vulnerability is due to the presence of a default private key …

Lierda Grill Temperature Monitor V1.00_50006 has a default password of admin for the admin account, which allows an attacker to cause a Denial of Service or Information Disclosure via the undocumented access-point configuration page locate…

Silver Peak EdgeConnect SD-WAN before 8.1.7.x has an SNMP service with a public value for rocommunity and trapcommunity.

On DTEN D5 and D7 before 1.3.4 devices, factory settings allows for firmware reflash and Android Debug Bridge (adb) enablement.

NetApp FAS 8300/8700 and AFF A400 Baseboard Management Controller (BMC) firmware versions 13.x prior to 13.1P1 were shipped with a default account enabled that could allow unauthorized arbitrary command execution via local access.

A vulnerability in the SSH key management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to connect to the affected system with the privileges o…

The Last.fm desktop app (Last.fm Scrobbler) through 2.1.39 on macOS makes HTTP requests that include an API key without the use of SSL/TLS. Although there is an Enable SSL option, it is disabled by default, and cleartext requests are made …

A flaw was found in Ansible Tower, versions 3.6.x before 3.6.2 and 3.5.x before 3.5.3, where enabling RabbitMQ manager by setting it with '-e rabbitmq_enable_manager=true' exposes the RabbitMQ management interface publicly, as expected. If…

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, local attacker to gain unauthorized access to an affected device. The vulnerability is due to the existence of default credentials within the default configura…

In refresh of DevelopmentTiles.java, there is the possibility of leaving development settings accessible due to an insecure default value. This could lead to unwanted access to development settings, with no additional execution privileges …

In the configuration of NFC modules on certain devices, there is a possible failure to distinguish individual devices due to an insecure default value. This could lead to local escalation of privilege with no additional execution privilege…

In SmsDefaultDialog.onStart of SmsDefaultDialog.java, there is a possible escalation of privilege due to an overlay attack. This could lead to local escalation of privilege, granting privileges to a local app without the user's informed co…

An issue was discovered on TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. It performs actions based on certain SMS commands. This can be used to set up a voice communication channel from the watch to any telephone number, initiated …

In OatFileAssistant::GenerateOatFile of oat_file_assistant.cc, there is a possible file corruption issue due to an insecure default value. This could lead to local escalation of privilege with no additional execution privileges needed. Use…

An application with overlay permission can display overlays on top of settings UI. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. Product: Andro…

In processPhonebookAccess of CachedBluetoothDevice.java, there is a possible permission bypass due to an insecure default value. This could lead to local information disclosure of the user's contact list with no additional execution privil…

Asio C++ Library before 1.13.0 lacks a fallback error code in the case of SSL_ERROR_SYSCALL with no associated error information from the SSL library being used.

Cloud Foundry Stratos, versions prior to 2.3.0, deploys with a public default session store secret. A malicious user with default session store secret can brute force another user's current Stratos session, and act on behalf of that user.

Premisys Identicard version 3.1.190 database uses default credentials. Users are unable to change the credentials without vendor intervention.

IBM Open Power Firmware OP910 and OP920 could allow access to BMC via IPMI using default OpenBMC password even after BMC password was changed away from the default password. IBM X-Force ID: 158702.

IBM DataPower Gateway 7.6.0.0-7 throug 6.0.14 and 2018.4.1.0 through 2018.4.1.5 have a default administrator account that is enabled if the IPMI LAN channel is enabled. A remote attacker could use this account to gain unauthorised access t…

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Certain versions between 2.x to 5.x (refer to advisory) of the NetApp Service Processor firmware were shipped with a default account enabled that could allow unauthorized arbitrary command execution. Any platform listed in the advisory Imp…