CVE-2026-99710

UNRATEDCVSS · not yet scored

Also known asEUVD-2026-131003 (ENISA EUVD) · GHSA-hqqf-mx5q-g7pm (GitHub Security Advisories)Source: ENISA EUVD

—
EchelonGraph verdictMonitorLow exploitation likelihood right now — keep watching.
  • No CVSS published and no exploitation signals yet
CISA-KEV: Not listedEPSS PROB: 0.2%CVSS v2: —Exploit: None knownExposed services: Not assessed

A fix is available — apply it.

In the Linux kernel, the following vulnerability has been resolved:

KVM: x86/mmu: Cap number of parent PTEs per SP at 1000 (the arbitrary rmap limit)

When potentially reusing a shadow page, zap the shadow page if its number of parent PTEs exceeds KVM's (mostly) arbitrary rmap recycling threshold. Letting the guest create a (mostly) unbounded number of parent PTEs allows the guest to coerce KVM into creating lists containing millions of PTEs, effectively bounded only by the maximum number of shadow pages.

Because PTE lists are simple singly linked lists, removal is O(n). Even worse, if a list is constructed just so, teardown can be O(n^2), e.g. if SPTEs are built such that zapping child SPTEs always zaps the last entry in the list. To cap things off, all paths that walk PTE lists do so while holding mmu_lock, without conditionally rescheduling.

Using a doubly linked list would not address the issue, as removal would remain O(n) since KVM still wouldn't know where in the list to remove from. Removal could be made O(1) by storing a per-SPTE pointer, but that would largely defeat the purpose of reusing SPs, and would penalize well-behaved guests, especially for nested TDP where aliasing page tables is uncommon.

So, cap the maximum number of parent PTEs at the rmap limit. In practice, well-behaved guests will likely never run afoul of the limit. E.g. when running Linux as L1 with TDP, the number of parent PTEs for a single SP tops out at under 200 (though undoubtedly obscure workloads can push it higher). Deliberately use a "greater than or equal" as opposed to rmap's strictly "greater than", as the rmap code checks the threshold immediately *after* inserting into the list, i.e. the limit is 1000 for rmaps, KVM just very briefly blows past it.

Apply the check to both indirect and direct SPs, because while a fully direct MMU naturally limits the number of parent PTEs to '1', direct SPs in indirect MMUs have no such constraint. E.g. if the guest maps a huge PTE into many locations in its page tables, and KVM is backing the hugepage with a direct SP, i.e. with a series of smaller pages, then KVM could end up with a direct SP with many parents.

Note, shadow_mmu_try_split_huge_pages() always restarts the rmap walk or bails entirely if it gets to the point where it tries to grab a SP, i.e. there is *no* pre-existing bug that would be tripped by zapping a SP and thus rmaps when getting a SP.

CVSS
—
EchelonGraph score
Not yet assessedNo source has published severity data for this CVE yet — no CVSS score from NVD or a CNA, no GitHub advisory, and it is not in CISA KEV. This is not a rating of zero; we cannot assess it yet.
EG Score
—
EG Risk
—
EPSS PROB
0.2%
EPSS %ILE
6th
KEV
Not listed

What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)

EG Severity
Not assessed: no CVSS publishedA missing CVSS is not a severity of zero.
EG Likelihood
0.2% within 30 daysSource: FIRST EPSS (model v2026.06.15, score date 2026-11-21). FIRST's exploitation probability, not an EchelonGraph model.
Confirmed exploitation
None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
EG Priority
No SSVC decision: EchelonGraph has not assessed this CVECISA BOD 26-04: 14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.Each input and its source, and whom BOD 26-04 binds: the BOD 26-04 block below.

BOD 26-04 (CISA's remediation timeline, Table 1)14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.

The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). Where an input reads “CISA's BOD 26-04 default”, no one has published it for this CVE, and CISA's implementation guidance says: “If “Automatable” and “Technical Impact” information items about a CVE ID are not available and the CVE ID is not in the KEV Catalog, CISA will treat its values as “no” and “total,” respectively, until CISA or a third party provides metadata about the CVE ID. CISA will always provide the Vulnrichment data for a CVE ID listed in the KEV Catalog.” Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it

Published

November 20, 2026

Last Modified

November 22, 2026

Vendor Advisories for CVE-2026-99710(2)

These vendors published their own advisory mentioning this CVE — often with vendor-specific remediation steps + affected product lists not in NVD.

Data Freshness Timeline

(refreshed 7× in last 7d / 7× in last 30d)

Each row is a time one of our pipelines fetched, updated or re-scored this CVE. For example, "NVD update" means NVD published or revised its analysis for this CVE; "MITRE cvelistV5" means we ingested or refreshed its CVE.org record (CNA or CISA ADP). An arrow marks a change the record states ("CVSS → 9.1"); EPSS and GHSA rows show the values recorded at that time, not what changed (EPSS values are rounded; hover one for the exact figures). "EchelonGraph re-scored" is our own recompute of this CVE's score, not an update from a source, and is not counted in the refreshes above. Most recent first.

  1. 2026-11-22 11:17 UTCEchelonGraph re-scored
  2. 2026-11-22 11:17 UTCVendor advisory
  3. 2026-11-22 11:17 UTCGHSA enrichmentGHSA-hqqf-mx5q-g7pm
  4. 2026-11-21 16:42 UTCEPSS rescoreEPSS 0.2% · 6th percentile
  5. 2026-11-20 16:39 UTCEPSS rescoreEPSS 0.2% · 6th percentile
  6. 2026-11-20 08:06 UTCGHSA enrichmentGHSA-hqqf-mx5q-g7pm
  7. 2026-11-20 07:04 UTCENISA EUVD ID recordedEUVD-2026-131003 · Source: ENISA EUVD
  8. 2026-11-20 05:58 UTCEchelonGraph re-scored
  9. 2026-11-20 05:57 UTCMITRE cvelistV5first tracked

Frequently asked(4)

What is CVE-2026-99710?
CVE-2026-99710 is a vulnerability whose severity is not yet rated; its CVE record was published on November 20, 2026. In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Cap number of parent PTEs per SP at 1000 (the arbitrary rmap limit) When potentially reusing a shadow page, zap the shadow page if its number of parent PTEs exceeds KVM's (mostly) arbitrary rmap recycling threshold.…
When was the CVE record for CVE-2026-99710 published?
The CVE record for CVE-2026-99710 was published on November 20, 2026. That is the record's publication date; the vulnerability itself may have been made public earlier. EchelonGraph's copy of the record carries a last-modified date of November 22, 2026; the record at its source may have been updated since.
Is CVE-2026-99710 actively exploited?
CVE-2026-99710 is not currently on CISA's Known Exploited Vulnerabilities catalog. FIRST EPSS estimates a 0.2% probability of exploitation in the next 30 days (6th percentile of EPSS-scored CVEs).
How do I remediate CVE-2026-99710?
A fix for CVE-2026-99710 is available: update to the fixed version the vendor names in its advisory. The vendor advisories EchelonGraph has for CVE-2026-99710 are linked in the Vendor Advisories panel on this page.

Dependency Blast Radius

Explore the affected products and dependency analysis for CVE-2026-99710

Explore →

Is Your Infrastructure Affected by CVE-2026-99710?

EchelonGraph automatically scans your cloud infrastructure and maps CVE exposure using blast radius analysis.