CVE-2026-99570

UNRATEDCVSS · not yet scored

Also known asEUVD-2026-131020 (ENISA EUVD) · GHSA-gmxm-2cpj-g8rj (GitHub Security Advisories)Source: ENISA EUVD

—
EchelonGraph verdictMonitorLow exploitation likelihood right now — keep watching.
  • No CVSS published and no exploitation signals yet
CISA-KEV: Not listedEPSS PROB: 0.2%CVSS v2: —Exploit: None knownExposed services: Not assessed

A fix is available — apply it.

In the Linux kernel, the following vulnerability has been resolved:

f2fs: fix to invalidate curseg if change_curseg() fails

Our consistency stress test (fsstress + fio + atomic write workers + "f2fs_io shutdown 1") triggers below kernel BUG:

F2FS-fs (vdd): Stopped filesystem due to reason: 0 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:3989! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI Workqueue: writeback wb_workfn (flush-253:48) RIP: 0010:f2fs_allocate_data_block+0x257a/0x38e0 Call Trace: do_write_block+0x155/0xc10 f2fs_outplace_write_data+0x192/0x340 f2fs_do_write_data_page+0xc57/0x1880 f2fs_write_single_data_page+0xda9/0x15a0 f2fs_write_cache_pages+0x973/0x1f20 __f2fs_write_data_pages+0x6c4/0x1890 do_writepages+0x21e/0x560 __writeback_single_inode+0x119/0x11b0 writeback_sb_inodes+0x67d/0x17a0 wb_writeback+0x207/0x820 wb_workfn+0x128/0xc30 process_one_work+0x925/0x1600 worker_thread+0x60a/0xff0 kthread+0x35f/0x460 ret_from_fork+0x474/0x7e0 ret_from_fork_asm+0x1a/0x30

The BUG is f2fs_bug_on(sbi, curseg->next_blkoff >= BLKS_PER_SEG(sbi)) in f2fs_allocate_data_block(), next_blkoff was 512.

The root cause is a race in between atomic write commit and shutdown as below:

Thread A (commit atomic write) Thread B (shutdown) Thread C (writeback)

  • f2fs_ioc_commit_atomic_write
  • f2fs_commit_atomic_write
  • __f2fs_commit_atomic_write
  • __replace_atomic_write_block
  • f2fs_replace_block
  • __f2fs_replace_block
  • f2fs_ioc_shutdown
  • f2fs_do_shutdown
: F2FS_GOING_DOWN_METASYNC
  • f2fs_sync_fs
  • f2fs_write_single_data_page
: pass f2fs_cp_error() check
  • f2fs_stop_checkpoint
: set CP_ERROR_FLAG
  • change_curseg
  • reset_curseg
: curseg->segno = new_segno : curseg->alloc_type = SSR : curseg->next_blkoff = __next_free_blkoff() which is BLKS_PER_SEG if there is no free slot in new_segno
  • f2fs_get_sum_cache
: return -EIO due to f2fs_cp_error() : return error w/o restoring curseg : goto out_unlock, skip restoring old segno, blkoff and alloc_type
  • f2fs_do_write_data_page
  • f2fs_outplace_write_data
  • do_write_block
  • f2fs_allocate_data_block
: curseg->segno is valid : f2fs_bug_on(next_blkoff >= BLKS_PER_SEG)

Since commit 86f33603f8c5 ("f2fs: handle errors of f2fs_get_meta_page_nofail"), change_curseg() can fail after the curseg has already been switched to the new segment, then the curseg is left in an inconsistent state: it points to a segment which may have no free slot, its summary block is zeroed, and the caller can not restore it. Subsequent block allocation on the curseg will trigger the BUG. Moreover, the writeback thread dies with curseg_lock, curseg_mutex and sentry_lock held, so the commit, shutdown and other I/O threads hang in D state.

Since change_curseg() only fails once CP_ERROR_FLAG is set, no checkpoint will be committed afterward, let's invalidate the curseg via reset_curseg_fields() on failure, as new_curseg() does for -ENOSPC, then f2fs_allocate_data_block() will fail with -ENOSPC on the curseg instead of triggering BUG, and do_write_block() can handle the error since CP_ERROR_FLA ---truncated---

CVSS
—
EchelonGraph score
Not yet assessedNo source has published severity data for this CVE yet — no CVSS score from NVD or a CNA, no GitHub advisory, and it is not in CISA KEV. This is not a rating of zero; we cannot assess it yet.
EG Score
—
EG Risk
—
EPSS PROB
0.2%
EPSS %ILE
6th
KEV
Not listed

What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)

EG Severity
Not assessed: no CVSS publishedA missing CVSS is not a severity of zero.
EG Likelihood
0.2% within 30 daysSource: FIRST EPSS. FIRST's exploitation probability, not an EchelonGraph model.
Confirmed exploitation
None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
EG Priority
No SSVC decision: EchelonGraph has not assessed this CVECISA BOD 26-04: 14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.Each input and its source, and whom BOD 26-04 binds: the BOD 26-04 block below.

BOD 26-04 (CISA's remediation timeline, Table 1)14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.

The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). Where an input reads “CISA's BOD 26-04 default”, no one has published it for this CVE, and CISA's implementation guidance says: “If “Automatable” and “Technical Impact” information items about a CVE ID are not available and the CVE ID is not in the KEV Catalog, CISA will treat its values as “no” and “total,” respectively, until CISA or a third party provides metadata about the CVE ID. CISA will always provide the Vulnrichment data for a CVE ID listed in the KEV Catalog.” Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it

Published

November 20, 2026

Last Modified

November 20, 2026

Vendor Advisories for CVE-2026-99570(2)

These vendors published their own advisory mentioning this CVE — often with vendor-specific remediation steps + affected product lists not in NVD.

Data Freshness Timeline

(refreshed 5× in last 7d / 5× in last 30d)

Each row is a time one of our pipelines fetched, updated or re-scored this CVE. For example, "NVD update" means NVD published or revised its analysis for this CVE; "MITRE cvelistV5" means we ingested or refreshed its CVE.org record (CNA or CISA ADP). An arrow marks a change the record states ("CVSS → 9.1"); EPSS and GHSA rows show the values recorded at that time, not what changed (EPSS values are rounded; hover one for the exact figures). "EchelonGraph re-scored" is our own recompute of this CVE's score, not an update from a source, and is not counted in the refreshes above. Most recent first.

  1. 2026-11-21 16:42 UTCEPSS rescoreEPSS 0.2% · 6th percentile
  2. 2026-11-20 16:39 UTCEPSS rescoreEPSS 0.2% · 6th percentile
  3. 2026-11-20 08:04 UTCGHSA enrichmentGHSA-gmxm-2cpj-g8rj
  4. 2026-11-20 07:04 UTCENISA EUVD ID recordedEUVD-2026-131020 · Source: ENISA EUVD
  5. 2026-11-20 05:59 UTCEchelonGraph re-scored
  6. 2026-11-20 05:57 UTCMITRE cvelistV5first tracked

Frequently asked(4)

What is CVE-2026-99570?
CVE-2026-99570 is a vulnerability whose severity is not yet rated; its CVE record was published on November 20, 2026. In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to invalidate curseg if change_curseg() fails Our consistency stress test (fsstress + fio + atomic write workers + "f2fs_io shutdown 1") triggers below kernel BUG: F2FS-fs (vdd): Stopped filesystem due to reason: 0…
When was the CVE record for CVE-2026-99570 published?
The CVE record for CVE-2026-99570 was published on November 20, 2026. That is the record's publication date; the vulnerability itself may have been made public earlier. EchelonGraph's copy of the record carries a last-modified date of November 20, 2026; the record at its source may have been updated since.
Is CVE-2026-99570 actively exploited?
CVE-2026-99570 is not currently on CISA's Known Exploited Vulnerabilities catalog. FIRST EPSS estimates a 0.2% probability of exploitation in the next 30 days (6th percentile of EPSS-scored CVEs).
How do I remediate CVE-2026-99570?
A fix for CVE-2026-99570 is available: update to the fixed version the vendor names in its advisory. The vendor advisories EchelonGraph has for CVE-2026-99570 are linked in the Vendor Advisories panel on this page.

Dependency Blast Radius

Explore the affected products and dependency analysis for CVE-2026-99570

Explore →

Is Your Infrastructure Affected by CVE-2026-99570?

EchelonGraph automatically scans your cloud infrastructure and maps CVE exposure using blast radius analysis.