CVE-2026-99528

HIGHPre-NVD 7.87.8
EchelonGraph scoreMEDIUM confidence

“—” beside the score: it is equal to the CVSS score beside it.

This high-severity CVE scores 7.8 under a secondary CVSS source (NVD's own analysis pending). EPSS exploit probability: 0.2% (6th percentile of EPSS-scored CVEs). No GitHub Security Advisory CVSS is on record for this CVE.

Triggered by: Headline CVSS from a secondary CVSS source
Sources: EPSS, a secondary CVSS source

Also known asEUVD-2026-130251 (ENISA EUVD) · GHSA-hv78-pcw8-89vv (GitHub Security Advisories)Source: ENISA EUVD

7.8EG
EchelonGraph verdictPlan a fixRemediate within your standard update timelines (the SSVC decision on this page).
  • High severity, but no confirmed exploitation yet
CISA-KEV: Not listedEPSS PROB: 0.2%CVSS: 7.8Exploit: None knownExposed services: Not assessed

A fix is available — apply it.

In the Linux kernel, the following vulnerability has been resolved:

SUNRPC: fix netns use-after-free in write_gssp()

While fuzzing with a customized syzkaller, I hit a refcount warning in xprt_alloc(), reached from a write to /proc/net/rpc/use-gss-proxy:

refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0xf8/0x120 CPU: 0 PID: 10404 Comm: syz.0.17 Not tainted 7.3.0-rc1-00096-gcfebfd3db73d Call Trace: xprt_alloc+0x83f/0x9d0 xs_setup_xprt+0xaf/0x3c0 xs_setup_local+0x47/0x7f0 xprt_create_transport+0x16c/0x730 rpc_create+0x38e/0x7f0 gssp_rpc_create+0xe2/0x180 set_gssp_clnt+0xba/0x1b0 write_gssp+0x200/0x310 proc_reg_write+0x240/0x330 vfs_write+0x2aa/0x1050 ksys_write+0x12a/0x250 do_syscall_64+0x117/0x750 entry_SYSCALL_64_after_hwframe+0x77/0x7f

create_use_gss_proxy_proc_entry() stores the struct net pointer as the proc entry's private data without taking a reference on it, and an open file descriptor does not pin the namespace either, as procfs only pins the proc_dir_entry. write_gssp() reads that pointer back with pde_data() and hands it to set_gssp_clnt(), which reaches xprt_init():

xprt->xprt_net = get_net_track(net, &xprt->ns_tracker, GFP_KERNEL);

get_net_track() -> get_net() -> refcount_inc() is unconditional, so rpc_create() assumes its caller holds a reference on args.net. write_gssp() does not.

Dropping the last ns.count reference does not make the file go away. __put_net() only queues cleanup_net() on a workqueue, and the remove_proc_entry() that fences off further writes runs from the rpcsec_gss pernet .exit method, that is, from inside cleanup_net(). A write landing between those two points increments a refcount that is already zero. cleanup_net() does not re-read ns.count, so the namespace is freed anyway and the rpc_xprt -- along with the AF_LOCAL socket opened for it -- is left pointing at freed memory. The resurrected count is visible to the rest of that teardown too: with CONFIG_IPV6_MROUTE the same cleanup_net() worker then trips !mr_can_free_table() in ip6mr_free_table(), which tests check_net() on the namespace it is freeing.

It reduces to opening /proc/net/rpc/use-gss-proxy inside a new network namespace, calling setns() back to the original one to drop the last reference, and then writing "1" to the still-open descriptor.

Take the reference in write_gssp() itself and refuse the write when the namespace is already gone. This is what procfs does for every other /proc/net file: get_proc_net() is maybe_get_net(PDE_NET(PDE(inode))) and seq_open_net() returns -ENXIO when it fails. PDE_NET() cannot be reused here because the parent directory /proc/net/rpc carries no namespace pointer. Adding a .pre_exit to rpcsec_gss_net_ops so the entry is removed earlier would only narrow the window, since pre_exit also runs from cleanup_net().

Live namespaces are unaffected: a write still returns the error from set_gssp_clnt(), a write of "2" still returns -EINVAL, and reads are untouched.

CVSS v3
7.8
EG Score
7.8HIGHmedium confidence
EG Risk
35
EG Risk 35/100

EG Risk is EchelonGraph's 0–100 priority score. It fuses impact severity (EG Severity, the CVSS base score, never the KEV-floored or EPSS-lifted EG Score) with real-world exploitation and automatability, under weights EchelonGraph set by hand, so you can rank equal-severity CVEs and fix the most dangerous first. Higher = act sooner.

How it’s computed (value × EchelonGraph’s weight)
Severity78% × 45%
Impact severity (EG Severity): CVSS 7.8 of 10. Never the KEV-floored or EPSS-lifted EG Score.
Exploitation0.2% × 40%
FIRST EPSS: the 30-day exploitation probability when EchelonGraph scored this CVE.
Automatability0% × 15%
CISA's BOD 26-04 default: no one has published Automatable for this CVE, and CISA treats it as “no” for a CVE not in KEV.
SSVC (CISA's decision table, applied by EchelonGraph): Track at low or medium mission impact; Track* at high (mission-essential systems).
Exploitation none (no CISA value, KEV listing or exploit code on record) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). EchelonGraph holds no SSVC assessment of this CVE from CISA: none of these inputs is from Vulnrichment. EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE.
Action: A fix is available. Apply it within your standard update timelines.
EPSS PROB
0.2%
EPSS %ILE
6th
KEV
Not listed

What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)

The EG score (7.8): severity, escalated by confirmed exploitation. This CVE's 7.8 is its impact severity (EG Severity), not escalated.

EG Severity
7.8 HIGHCVSS-B, impact only: no KEV listing, EPSS or EG-KEV tier raises it.a secondary CVSS source · CVSS v3.0 or v3.1
EG Likelihood
0.2% within 30 daysSource: FIRST EPSS (model v2026.06.15, score date 2026-11-21). FIRST's exploitation probability, not an EchelonGraph model.
Confirmed exploitation
None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
EG Priority
SSVC Track at medium mission impactTrack at low or medium mission impact; Track* at high (mission-essential systems).CISA BOD 26-04: 14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.Each input and its source, and whom BOD 26-04 binds: the SSVC and BOD 26-04 blocks below.

SSVC (CISA's decision table, applied by EchelonGraph)Track at low or medium mission impact; Track* at high (mission-essential systems).

A fix is available. Apply it within your standard update timelines.

Exploitation none (no CISA value, KEV listing or exploit code on record) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). EchelonGraph holds no SSVC assessment of this CVE from CISA: none of these inputs is from Vulnrichment. EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE. Mission impact is CISA's Mission & Well-being decision point, and only you can judge it. CISA's table makes it high when Mission Prevalence is Essential — the vulnerable component "directly provides capabilities that constitute at least one MEF for at least one entity" (MEF: mission essential function) — or when Public Well-Being Impact is Irreversible: "multiple fatalities are likely", the cyber-physical system "is likely lost or destroyed", "extreme or serious externalities" are imposed on other parties, or social systems such as elections or the financial grid "are destabilized and potentially collapse". CISA's decision table

BOD 26-04 (CISA's remediation timeline, Table 1)14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.

The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). Where an input reads “CISA's BOD 26-04 default”, no one has published it for this CVE, and CISA's implementation guidance says: “If “Automatable” and “Technical Impact” information items about a CVE ID are not available and the CVE ID is not in the KEV Catalog, CISA will treat its values as “no” and “total,” respectively, until CISA or a third party provides metadata about the CVE ID. CISA will always provide the Vulnrichment data for a CVE ID listed in the KEV Catalog.” Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it

Published

November 19, 2026

Last Modified

November 22, 2026

Advisory Details (4)

Auto-updated Nov 22, 2026
Patch available.
Web page

SUNRPC: fix netns use-after-free in write_gssp() - kernel/git/stable/linux.git - Linux kernel stable tree

https://git.kernel.org/stable/c/e7a8721b7edb54a157623f9e31d71345333b5fb9
Web page

SUNRPC: fix netns use-after-free in write_gssp() - kernel/git/stable/linux.git - Linux kernel stable tree

https://git.kernel.org/stable/c/75120454474be7bc62b77af12bd591a339be27e1
Web page

SUNRPC: fix netns use-after-free in write_gssp() - kernel/git/stable/linux.git - Linux kernel stable tree

https://git.kernel.org/stable/c/3c3b401650227e147c609c33fa458d5d963f2918
Web page

SUNRPC: fix netns use-after-free in write_gssp() - kernel/git/stable/linux.git - Linux kernel stable tree

https://git.kernel.org/stable/c/0a908446c5edc42905f9136e91bbf4e45d0747b6

Vendor Advisories for CVE-2026-99528(2)

These vendors published their own advisory mentioning this CVE — often with vendor-specific remediation steps + affected product lists not in NVD.

Data Freshness Timeline

(refreshed 10× in last 7d / 10× in last 30d)

Each row is a time one of our pipelines fetched, updated or re-scored this CVE. For example, "NVD update" means NVD published or revised its analysis for this CVE; "MITRE cvelistV5" means we ingested or refreshed its CVE.org record (CNA or CISA ADP). An arrow marks a change the record states ("CVSS v3 → 9.1"); EPSS and GHSA rows show the values recorded at that time, not what changed (EPSS values are rounded; hover one for the exact figures). "EchelonGraph re-scored" is our own recompute of this CVE's score, not an update from a source, and is not counted in the refreshes above. Most recent first.

  1. 2026-11-22 11:28 UTCEchelonGraph re-scored
  2. 2026-11-22 11:28 UTCVendor advisory
  3. 2026-11-22 11:28 UTCGHSA enrichmentGHSA-hv78-pcw8-89vv
  4. 2026-11-22 11:16 UTCEchelonGraph re-scoredFirst assessed: 7.8 HIGH
  5. 2026-11-22 11:16 UTCVendor advisory
  6. 2026-11-22 11:16 UTCGHSA enrichmentGHSA-hv78-pcw8-89vv
  7. 2026-11-22 11:15 UTCMITRE cvelistV5CVSS v3 → 7.8 · severity → HIGH
  8. 2026-11-21 16:42 UTCEPSS rescoreEPSS 0.2% · 6th percentile
  9. 2026-11-20 16:39 UTCEPSS rescoreEPSS 0.2% · 6th percentile
  10. 2026-11-19 16:03 UTCENISA EUVD ID recordedEUVD-2026-130251 · Source: ENISA EUVD
  11. 2026-11-19 15:51 UTCGHSA enrichmentGHSA-hv78-pcw8-89vv
  12. 2026-11-19 14:48 UTCEchelonGraph re-scored
  13. 2026-11-19 14:48 UTCMITRE cvelistV5first tracked

Frequently asked(5)

What is CVE-2026-99528?
CVE-2026-99528 is a high-severity vulnerability; its CVE record was published on November 19, 2026. In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix netns use-after-free in write_gssp() While fuzzing with a customized syzkaller, I hit a refcount warning in xprt_alloc(), reached from a write to /proc/net/rpc/use-gss-proxy: refcount_t: addition on 0; use-after-free.…
When was the CVE record for CVE-2026-99528 published?
The CVE record for CVE-2026-99528 was published on November 19, 2026. That is the record's publication date; the vulnerability itself may have been made public earlier. EchelonGraph's copy of the record carries a last-modified date of November 22, 2026; the record at its source may have been updated since.
Is CVE-2026-99528 actively exploited?
CVE-2026-99528 is not currently on CISA's Known Exploited Vulnerabilities catalog. FIRST EPSS estimates a 0.2% probability of exploitation in the next 30 days (6th percentile of EPSS-scored CVEs).
What is the CVSS score of CVE-2026-99528?
CVE-2026-99528 has a CVSS base score of 7.8 (a secondary CVSS source that NVD displays; NVD's own analysis pending).
How do I remediate CVE-2026-99528?
A fix for CVE-2026-99528 is available: update to the fixed version the vendor names in its advisory. The vendor advisories EchelonGraph has for CVE-2026-99528 are linked in the Vendor Advisories panel on this page.

Dependency Blast Radius

Explore the affected products and dependency analysis for CVE-2026-99528

Explore →

Is Your Infrastructure Affected by CVE-2026-99528?

EchelonGraph automatically scans your cloud infrastructure and maps CVE exposure using blast radius analysis.