CVE-2026-99433

HIGHPre-NVD 8.88.8
EchelonGraph scoreMEDIUM confidence

“—” beside the score: it is equal to the CVSS score beside it.

This high-severity CVE scores 8.8 under the CNA's CVSS (NVD's own analysis pending). EPSS exploit probability: 0.2% (7th percentile of EPSS-scored CVEs). No GitHub Security Advisory CVSS is on record for this CVE.

Triggered by: Headline CVSS from the CNA's CVSS
Sources: the CNA's CVSS, EPSS

Also known asEUVD-2026-130099 (ENISA EUVD) · GHSA-j695-h6vj-gqhh (GitHub Security Advisories)Source: ENISA EUVD

8.8EG
EchelonGraph verdictPlan a fixRemediate within your standard update timelines (the SSVC decision on this page).
  • High severity, but no confirmed exploitation yet
CISA-KEV: Not listedEPSS PROB: 0.2%CVSS: 8.8Exploit: None knownExposed services: Not assessed

A fix is available — apply it.

In the Linux kernel, the following vulnerability has been resolved:

ocfs2/dlm: hold a lock reference across grant AST enqueue

A newly granted remote lock must remain alive until its grant AST is queued. dlmlock_master() publishes the lock on res->granted with its base and queue references, then drops res->spinlock before calling dlm_queue_ast(). The resource's reserved AST count does not retain the lock itself.

This can fail when a peer dies with an immediately grantable CREATE buffered on its socket. O2NET's node-down callback flushes receive work before DLM cleanup, but the flush only waits for work queued on entry. A data-ready callback that already selected the socket container can queue new receive work after the flush advances its work color. Socket shutdown does not discard bytes already queued for TCP receive.

The late receive work and DLM node-down cleanup can interleave as follows (the lock reference operations shown are before this fix):

Socket data-ready Node-down thread Receive worker ----------------- ---------------- -------------- o2net_data_ready() select sc under callback read lock o2net_disconnect_node() queue shutdown begin flush; new color queue sc_rx_work in the new color release callback lock shutdown socket flush returns read buffered CREATE dlmlock_master() lock res->spinlock add lock to granted unlock res->spinlock DLM node-down cleanup lock res->spinlock dlm_free_dead_locks() unlink lock put queue/base refs free lock unlock res->spinlock dlm_queue_ast() __dlm_queue_ast() read lock->lockres (use-after-free)

DLM cleanup holds res->spinlock while dlm_free_dead_locks() drops the queue and base references. The CREATE handler no longer holds that spinlock when __dlm_queue_ast() reads the lock, before taking its AST list reference.

Take a temporary lock reference under res->spinlock when a grant AST will be queued, and drop it after dlm_queue_ast(). This keeps the lock alive across cleanup until the AST path has taken its own reference, without reversing the existing AST/resource lock order.

KASAN report as below:

BUG: KASAN: slab-use-after-free in __dlm_queue_ast+0x8a4/0xc00 Read of size 8 at addr ffff88810ead5940 by task kworker/u16:3/52

CPU: 3 UID: 0 PID: 52 Comm: kworker/u16:3 Not tainted 7.3.0-rc4-next-20260921-pmb-bt-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: o2net o2net_rx_until_empty Call Trace: dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? __dlm_queue_ast+0x8a4/0xc00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? __dlm_queue_ast+0x8a4/0xc00 kasan_report+0xe0/0x110 ? __dlm_queue_ast+0x8a4/0xc00 __dlm_queue_ast+0x8a4/0xc00 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_lock+0x130/0x270 ? __pfx___dlm_queue_ast+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x45/0x60 ? srs ---truncated---

CVSS v3
8.8
EG Score
8.8HIGHmedium confidence
EG Risk
40
EG Risk 40/100

EG Risk is EchelonGraph's 0–100 priority score. It fuses impact severity (EG Severity, the CVSS base score, never the KEV-floored or EPSS-lifted EG Score) with real-world exploitation and automatability, under weights EchelonGraph set by hand, so you can rank equal-severity CVEs and fix the most dangerous first. Higher = act sooner.

How it’s computed (value × EchelonGraph’s weight)
Severity88% × 45%
Impact severity (EG Severity): CVSS 8.8 of 10. Never the KEV-floored or EPSS-lifted EG Score.
Exploitation0.2% × 40%
FIRST EPSS: the 30-day exploitation probability when EchelonGraph scored this CVE.
Automatability0% × 15%
CISA's BOD 26-04 default: no one has published Automatable for this CVE, and CISA treats it as “no” for a CVE not in KEV.
SSVC (CISA's decision table, applied by EchelonGraph): Track at low or medium mission impact; Track* at high (mission-essential systems).
Exploitation none (no CISA value, KEV listing or exploit code on record) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). EchelonGraph holds no SSVC assessment of this CVE from CISA: none of these inputs is from Vulnrichment. EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE.
Action: A fix is available. Apply it within your standard update timelines.
EPSS PROB
0.2%
EPSS %ILE
7th
KEV
Not listed

What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)

The EG score (8.8): severity, escalated by confirmed exploitation. This CVE's 8.8 is its impact severity (EG Severity), not escalated.

EG Severity
8.8 HIGHCVSS-B, impact only: no KEV listing, EPSS or EG-KEV tier raises it.the CNA's CVSS · CVSS v3.0 or v3.1
EG Likelihood
0.2% within 30 daysSource: FIRST EPSS (model v2026.06.15, score date 2026-11-21). FIRST's exploitation probability, not an EchelonGraph model.
Confirmed exploitation
None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
EG Priority
SSVC Track at medium mission impactTrack at low or medium mission impact; Track* at high (mission-essential systems).CISA BOD 26-04: 14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.Each input and its source, and whom BOD 26-04 binds: the SSVC and BOD 26-04 blocks below.

SSVC (CISA's decision table, applied by EchelonGraph)Track at low or medium mission impact; Track* at high (mission-essential systems).

A fix is available. Apply it within your standard update timelines.

Exploitation none (no CISA value, KEV listing or exploit code on record) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). EchelonGraph holds no SSVC assessment of this CVE from CISA: none of these inputs is from Vulnrichment. EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE. Mission impact is CISA's Mission & Well-being decision point, and only you can judge it. CISA's table makes it high when Mission Prevalence is Essential — the vulnerable component "directly provides capabilities that constitute at least one MEF for at least one entity" (MEF: mission essential function) — or when Public Well-Being Impact is Irreversible: "multiple fatalities are likely", the cyber-physical system "is likely lost or destroyed", "extreme or serious externalities" are imposed on other parties, or social systems such as elections or the financial grid "are destabilized and potentially collapse". CISA's decision table

BOD 26-04 (CISA's remediation timeline, Table 1)14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.

The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). Where an input reads “CISA's BOD 26-04 default”, no one has published it for this CVE, and CISA's implementation guidance says: “If “Automatable” and “Technical Impact” information items about a CVE ID are not available and the CVE ID is not in the KEV Catalog, CISA will treat its values as “no” and “total,” respectively, until CISA or a third party provides metadata about the CVE ID. CISA will always provide the Vulnrichment data for a CVE ID listed in the KEV Catalog.” Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it

Published

November 19, 2026

Last Modified

November 22, 2026

Advisory Details (4)

Auto-updated Nov 22, 2026
Patch available.
Web page

ocfs2/dlm: hold a lock reference across grant AST enqueue - kernel/git/stable/linux.git - Linux kernel stable tree

https://git.kernel.org/stable/c/f4ae0b96a4abc7d59088eb2e0a2ee524c15f3bf0
Web page

ocfs2/dlm: hold a lock reference across grant AST enqueue - kernel/git/stable/linux.git - Linux kernel stable tree

https://git.kernel.org/stable/c/71743471204e21113295c786e5cfa570294234a4
Web page

ocfs2/dlm: hold a lock reference across grant AST enqueue - kernel/git/stable/linux.git - Linux kernel stable tree

https://git.kernel.org/stable/c/11643cb726c6077c8d80766516c20ff25ba29609
Web page

ocfs2/dlm: hold a lock reference across grant AST enqueue - kernel/git/stable/linux.git - Linux kernel stable tree

https://git.kernel.org/stable/c/0eb7cd1641695c5de549516661c9b90ba20f943d

Vendor Advisories for CVE-2026-99433(2)

These vendors published their own advisory mentioning this CVE — often with vendor-specific remediation steps + affected product lists not in NVD.

Data Freshness Timeline

(refreshed 8× in last 7d / 8× in last 30d)

Each row is a time one of our pipelines fetched, updated or re-scored this CVE. For example, "NVD update" means NVD published or revised its analysis for this CVE; "MITRE cvelistV5" means we ingested or refreshed its CVE.org record (CNA or CISA ADP). An arrow marks a change the record states ("CVSS v3 → 9.1"); EPSS and GHSA rows show the values recorded at that time, not what changed (EPSS values are rounded; hover one for the exact figures). "EchelonGraph re-scored" is our own recompute of this CVE's score, not an update from a source, and is not counted in the refreshes above. Most recent first.

  1. 2026-11-22 11:17 UTCEchelonGraph re-scoredFirst assessed: 8.8 HIGH
  2. 2026-11-22 11:17 UTCVendor advisory
  3. 2026-11-22 11:17 UTCGHSA enrichmentGHSA-j695-h6vj-gqhh
  4. 2026-11-22 11:15 UTCMITRE cvelistV5CVSS v3 → 8.8 · severity → HIGH
  5. 2026-11-21 16:42 UTCEPSS rescoreEPSS 0.2% · 7th percentile
  6. 2026-11-20 16:39 UTCEPSS rescoreEPSS 0.2% · 7th percentile
  7. 2026-11-19 16:03 UTCENISA EUVD ID recordedEUVD-2026-130099 · Source: ENISA EUVD
  8. 2026-11-19 15:31 UTCGHSA enrichmentGHSA-j695-h6vj-gqhh
  9. 2026-11-19 14:49 UTCEchelonGraph re-scored
  10. 2026-11-19 14:48 UTCMITRE cvelistV5first tracked

Frequently asked(5)

What is CVE-2026-99433?
CVE-2026-99433 is a high-severity vulnerability; its CVE record was published on November 19, 2026. In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: hold a lock reference across grant AST enqueue A newly granted remote lock must remain alive until its grant AST is queued. dlmlock_master() publishes the lock on res->granted with its base and queue references, then…
When was the CVE record for CVE-2026-99433 published?
The CVE record for CVE-2026-99433 was published on November 19, 2026. That is the record's publication date; the vulnerability itself may have been made public earlier. EchelonGraph's copy of the record carries a last-modified date of November 22, 2026; the record at its source may have been updated since.
Is CVE-2026-99433 actively exploited?
CVE-2026-99433 is not currently on CISA's Known Exploited Vulnerabilities catalog. FIRST EPSS estimates a 0.2% probability of exploitation in the next 30 days (7th percentile of EPSS-scored CVEs).
What is the CVSS score of CVE-2026-99433?
CVE-2026-99433 has a CVSS base score of 8.8 (a secondary CVSS source that NVD displays; NVD's own analysis pending).
How do I remediate CVE-2026-99433?
A fix for CVE-2026-99433 is available: update to the fixed version the vendor names in its advisory. The vendor advisories EchelonGraph has for CVE-2026-99433 are linked in the Vendor Advisories panel on this page.

Dependency Blast Radius

Explore the affected products and dependency analysis for CVE-2026-99433

Explore →

Is Your Infrastructure Affected by CVE-2026-99433?

EchelonGraph automatically scans your cloud infrastructure and maps CVE exposure using blast radius analysis.