CVE-2026-99375

UNRATEDCVSS · not yet scored

Also known asEUVD-2026-130033 (ENISA EUVD) · GHSA-g74v-gp54-83c7 (GitHub Security Advisories)Source: ENISA EUVD

—
EchelonGraph verdictMonitorLow exploitation likelihood right now — keep watching.
  • No CVSS published and no exploitation signals yet
CISA-KEV: Not listedEPSS PROB: 0.2%CVSS v2: —Exploit: None knownExposed services: Not assessed

A fix is available — apply it.

In the Linux kernel, the following vulnerability has been resolved:

NFSv4/flexfiles: fail I/O to the data server once a lock is lost

When a client loses a byte-range lock, because its lease expired and it may not recover the lock (nfs.recover_lost_locks=0) or because reclaim failed, it marks the lock state NFS_LOCK_LOST and fails further I/O by that lock owner. Otherwise an application that believes it holds a lock over a range is never told that the lock is gone, and can overwrite data that another client has since written under its own lock on that range.

The NFSv4 READ/WRITE and file layout I/O paths apply this in rpc_call_prepare, where nfs4_set_rw_stateid() returns -EIO for a lost lock. The flexfiles data server I/O path does not: the NFSv3 data server path never checked, and the check on the NFSv4 path was removed when the data server stateid began to be taken from the layout.

Fail read and write RPCs to the data server in rpc_call_prepare when the lock is lost. The data server path has no use for the stateid that nfs4_set_rw_stateid() selects, and selecting it looks up a delegation or open stateid on every I/O. Instead add nfs4_lock_context_lost(), which only tests NFS_LOCK_LOST, and check it alongside the open state. Its lookup, __nfs4_lookup_lock_state(), is split out of __nfs4_find_lock_state() and takes no reference: a lock state is only unlinked from state->lock_states under state->state_lock, so one found while holding that lock cannot be freed before it is released. Use it in nfs4_copy_lock_stateid() as well, which only reads the lock state under that lock. That drops a reference get and put from stateid selection for all NFSv4 I/O without changing the stateid selected.

Terminating the RPC in rpc_call_prepare is not enough on its own. The done callback reads the -EIO as a data server connection error, forgets the device ID, and resets the I/O to pNFS (or, for an NFSv4 data server, possibly to the MDS). After a reset to pNFS a new LAYOUTGET is granted and rpc_call_prepare fails the I/O again, without end. The existing NFS_CONTEXT_BAD check does not loop, since the open state is then invalid and pnfs_update_layout() fails the reset I/O, but it still forgets the device ID.

So when an RPC that was never sent fails and the open context is bad, the open state is invalid, or the lock is lost, complete it with -EIO without error handling. An RPC that was sent and failed is handled as before, so a real data server error is still reported to the MDS.

CVSS
—
EchelonGraph score
Not yet assessedNo source has published severity data for this CVE yet — no CVSS score from NVD or a CNA, no GitHub advisory, and it is not in CISA KEV. This is not a rating of zero; we cannot assess it yet.
EG Score
—
EG Risk
—
EPSS PROB
0.2%
EPSS %ILE
13th
KEV
Not listed

What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)

EG Severity
Not assessed: no CVSS publishedA missing CVSS is not a severity of zero.
EG Likelihood
0.2% within 30 daysSource: FIRST EPSS. FIRST's exploitation probability, not an EchelonGraph model.
Confirmed exploitation
None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
EG Priority
No SSVC decision: EchelonGraph has not assessed this CVECISA BOD 26-04: 14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.Each input and its source, and whom BOD 26-04 binds: the BOD 26-04 block below.

BOD 26-04 (CISA's remediation timeline, Table 1)14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.

The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). Where an input reads “CISA's BOD 26-04 default”, no one has published it for this CVE, and CISA's implementation guidance says: “If “Automatable” and “Technical Impact” information items about a CVE ID are not available and the CVE ID is not in the KEV Catalog, CISA will treat its values as “no” and “total,” respectively, until CISA or a third party provides metadata about the CVE ID. CISA will always provide the Vulnrichment data for a CVE ID listed in the KEV Catalog.” Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it

Published

November 19, 2026

Last Modified

November 19, 2026

Vendor Advisories for CVE-2026-99375(2)

These vendors published their own advisory mentioning this CVE — often with vendor-specific remediation steps + affected product lists not in NVD.

Data Freshness Timeline

(refreshed 5× in last 7d / 5× in last 30d)

Each row is a time one of our pipelines fetched, updated or re-scored this CVE. For example, "NVD update" means NVD published or revised its analysis for this CVE; "MITRE cvelistV5" means we ingested or refreshed its CVE.org record (CNA or CISA ADP). An arrow marks a change the record states ("CVSS → 9.1"); EPSS and GHSA rows show the values recorded at that time, not what changed (EPSS values are rounded; hover one for the exact figures). "EchelonGraph re-scored" is our own recompute of this CVE's score, not an update from a source, and is not counted in the refreshes above. Most recent first.

  1. 2026-11-21 16:42 UTCEPSS rescoreEPSS 0.2% · 13th percentile
  2. 2026-11-20 16:39 UTCEPSS rescoreEPSS 0.2% · 13th percentile
  3. 2026-11-19 16:03 UTCENISA EUVD ID recordedEUVD-2026-130033 · Source: ENISA EUVD
  4. 2026-11-19 15:31 UTCGHSA enrichmentGHSA-g74v-gp54-83c7
  5. 2026-11-19 14:33 UTCEchelonGraph re-scored
  6. 2026-11-19 14:32 UTCMITRE cvelistV5first tracked

Frequently asked(4)

What is CVE-2026-99375?
CVE-2026-99375 is a vulnerability whose severity is not yet rated; its CVE record was published on November 19, 2026. In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fail I/O to the data server once a lock is lost When a client loses a byte-range lock, because its lease expired and it may not recover the lock (nfs.recover_lost_locks=0) or because reclaim failed, it marks the…
When was the CVE record for CVE-2026-99375 published?
The CVE record for CVE-2026-99375 was published on November 19, 2026. That is the record's publication date; the vulnerability itself may have been made public earlier. EchelonGraph's copy of the record carries a last-modified date of November 19, 2026; the record at its source may have been updated since.
Is CVE-2026-99375 actively exploited?
CVE-2026-99375 is not currently on CISA's Known Exploited Vulnerabilities catalog. FIRST EPSS estimates a 0.2% probability of exploitation in the next 30 days (13th percentile of EPSS-scored CVEs).
How do I remediate CVE-2026-99375?
A fix for CVE-2026-99375 is available: update to the fixed version the vendor names in its advisory. The vendor advisories EchelonGraph has for CVE-2026-99375 are linked in the Vendor Advisories panel on this page.

Dependency Blast Radius

Explore the affected products and dependency analysis for CVE-2026-99375

Explore →

Is Your Infrastructure Affected by CVE-2026-99375?

EchelonGraph automatically scans your cloud infrastructure and maps CVE exposure using blast radius analysis.