CVE-2026-93670

LOWPre-NVD 3.53.5
EchelonGraph scoreMEDIUM confidence

“—” beside the score: it is equal to the CVSS score beside it.

This low-severity CVE scores 3.5 under a secondary CVSS source (NVD's own analysis pending). EPSS exploit probability: 0.1% (3rd percentile of EPSS-scored CVEs). No GitHub Security Advisory CVSS is on record for this CVE.

Triggered by: Headline CVSS from a secondary CVSS source
Sources: EPSS, a secondary CVSS source

Also known asEUVD-2026-126668 (ENISA EUVD)Source: ENISA EUVD

3.5EG
EchelonGraph verdictMonitorNo release containing the referenced fix is confirmed: check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule (the SSVC decision on this page).
  • Lower severity and no public exploit yet
CISA-KEV: Not listedEPSS PROB: 0.1%CVSS: 3.5Exploit: None knownExposed services: Not assessed

A fix is referenced (a reference tagged "Patch", often a source commit), but no release containing it is confirmed — find the release that contains it; until it is applied, mitigate (WAF / firewall / segmentation).

The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build.

With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound.

The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands.

Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.

CVSS v3
3.5
EG Score
3.5LOWmedium confidence
EG Risk
16
EG Risk 16/100

EG Risk is EchelonGraph's 0–100 priority score. It fuses impact severity (EG Severity, the CVSS base score, never the KEV-floored or EPSS-lifted EG Score) with real-world exploitation and automatability, under weights EchelonGraph set by hand, so you can rank equal-severity CVEs and fix the most dangerous first. Higher = act sooner.

How it’s computed (value × EchelonGraph’s weight)
Severity35% × 45%
Impact severity (EG Severity): CVSS 3.5 of 10. Never the KEV-floored or EPSS-lifted EG Score.
Exploitation0.1% × 40%
FIRST EPSS: the 30-day exploitation probability when EchelonGraph scored this CVE.
Automatability0% × 15%
CISA's SSVC Automatable value: no (Vulnrichment).
SSVC (CISA's decision table, applied by EchelonGraph): Track at every mission impact level.
Exploitation none (CISA Vulnrichment) · Automatable no (CISA Vulnrichment) · Technical impact partial (CISA Vulnrichment). All three are CISA's SSVC values (Vulnrichment). EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE.
Action: A fix is referenced, but no release containing it is confirmed. Check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule.
EPSS PROB
0.1%
EPSS %ILE
3rd
KEV
Not listed

What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)

The EG score (3.5): severity, escalated by confirmed exploitation. This CVE's 3.5 is its impact severity (EG Severity), not escalated.

EG Severity
3.5 LOWCVSS-B, impact only: no KEV listing, EPSS or EG-KEV tier raises it.a secondary CVSS source · CVSS v3.0 or v3.1
EG Likelihood
0.1% within 30 daysSource: FIRST EPSS (model v2026.06.15, score date 2026-11-19). FIRST's exploitation probability, not an EchelonGraph model.
Confirmed exploitation
None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
EG Priority
SSVC Track at medium mission impactTrack at every mission impact level.CISA BOD 26-04: 60 days if the affected system is publicly exposed; Fix on system upgrade if it is not.No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.Each input and its source, and whom BOD 26-04 binds: the SSVC and BOD 26-04 blocks below.

SSVC (CISA's decision table, applied by EchelonGraph)Track at every mission impact level.

A fix is referenced, but no release containing it is confirmed. Check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule.

Exploitation none (CISA Vulnrichment) · Automatable no (CISA Vulnrichment) · Technical impact partial (CISA Vulnrichment). All three are CISA's SSVC values (Vulnrichment). EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE. Mission impact is CISA's Mission & Well-being decision point, and only you can judge it. CISA's table makes it high when Mission Prevalence is Essential — the vulnerable component "directly provides capabilities that constitute at least one MEF for at least one entity" (MEF: mission essential function) — or when Public Well-Being Impact is Irreversible: "multiple fatalities are likely", the cyber-physical system "is likely lost or destroyed", "extreme or serious externalities" are imposed on other parties, or social systems such as elections or the financial grid "are destabilized and potentially collapse". CISA's decision table

BOD 26-04 (CISA's remediation timeline, Table 1)60 days if the affected system is publicly exposed; Fix on system upgrade if it is not.

No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.

The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA Vulnrichment) · Technical impact partial (CISA Vulnrichment). Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it

Published

November 16, 2026

Last Modified

November 17, 2026

Weakness Classification(1)

MITRE Common Weakness Enumeration — the root-cause categories this CVE belongs to.

Data Freshness Timeline

(refreshed 7× in last 7d / 7× in last 30d)

Each row is a time one of our pipelines fetched, updated or re-scored this CVE. For example, "NVD update" means NVD published or revised its analysis for this CVE; "MITRE cvelistV5" means we ingested or refreshed its CVE.org record (CNA or CISA ADP). An arrow marks a change the record states ("CVSS v3 → 9.1"); EPSS and GHSA rows show the values recorded at that time, not what changed (EPSS values are rounded; hover one for the exact figures). "EchelonGraph re-scored" is our own recompute of this CVE's score, not an update from a source, and is not counted in the refreshes above. Most recent first.

  1. 2026-11-21 16:42 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  2. 2026-11-20 16:39 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  3. 2026-11-20 08:02 UTCEchelonGraph re-scored
  4. 2026-11-19 16:36 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  5. 2026-11-18 16:36 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  6. 2026-11-17 18:29 UTCEchelonGraph re-scored
  7. 2026-11-17 16:36 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  8. 2026-11-16 22:33 UTCEchelonGraph re-scored
  9. 2026-11-16 22:02 UTCENISA EUVD ID recordedEUVD-2026-126668 · Source: ENISA EUVD
  10. 2026-11-16 21:29 UTCEchelonGraph re-scoredFirst assessed: 3.5 LOW
  11. 2026-11-16 21:28 UTCMITRE cvelistV5first tracked

Frequently asked(5)

What is CVE-2026-93670?
CVE-2026-93670 is a low-severity vulnerability; its CVE record was published on November 16, 2026. The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers…
When was the CVE record for CVE-2026-93670 published?
The CVE record for CVE-2026-93670 was published on November 16, 2026. That is the record's publication date; the vulnerability itself may have been made public earlier. EchelonGraph's copy of the record carries a last-modified date of November 17, 2026; the record at its source may have been updated since.
Is CVE-2026-93670 actively exploited?
CVE-2026-93670 is not currently on CISA's Known Exploited Vulnerabilities catalog. FIRST EPSS estimates a 0.1% probability of exploitation in the next 30 days (3rd percentile of EPSS-scored CVEs).
What is the CVSS score of CVE-2026-93670?
CVE-2026-93670 has a CVSS base score of 3.5 (a secondary CVSS source that NVD displays; NVD's own analysis pending).
How do I remediate CVE-2026-93670?
A fix for CVE-2026-93670 is referenced (a reference tagged "Patch", often a source commit), but EchelonGraph has no release containing it on record. Check that reference and the vendor's advisory for a release that contains the fix and update to it; until then, restrict network exposure of the affected system or apply the vendor's mitigation.

Dependency Blast Radius

Explore the affected products and dependency analysis for CVE-2026-93670

Explore →

Is Your Infrastructure Affected by CVE-2026-93670?

EchelonGraph automatically scans your cloud infrastructure and maps CVE exposure using blast radius analysis.