CVE-2026-19595

MEDIUMPre-NVD 6.16.1
EchelonGraph scoreMEDIUM confidence

“—” beside the score: it is equal to the CVSS score beside it.

This medium-severity CVE scores 6.1 under a secondary CVSS source (NVD's own analysis pending). EPSS exploit probability: 0.1% (3rd percentile of EPSS-scored CVEs). No GitHub Security Advisory CVSS is on record for this CVE.

Triggered by: Headline CVSS from a secondary CVSS source
Sources: EPSS, a secondary CVSS source

Also known asEUVD-2026-104665 (ENISA EUVD)Source: ENISA EUVD

6.1EG
EchelonGraph verdictMonitorNo release containing the referenced fix is confirmed: check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule (the SSVC decision on this page).
  • Lower severity and no public exploit yet
CISA-KEV: Not listedEPSS PROB: 0.1%CVSS: 6.1Exploit: None knownExposed services: Not assessed

A fix is referenced (a reference tagged "Patch", often a source commit), but no release containing it is confirmed — find the release that contains it; until it is applied, mitigate (WAF / firewall / segmentation).

The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread.

An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing.

Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service.

The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated.

CVSS v3
6.1
EG Score
6.1MEDIUMmedium confidence
EG Risk
27
EG Risk 27/100

EG Risk is EchelonGraph's 0–100 priority score. It fuses impact severity (EG Severity, the CVSS base score, never the KEV-floored or EPSS-lifted EG Score) with real-world exploitation and automatability, under weights EchelonGraph set by hand, so you can rank equal-severity CVEs and fix the most dangerous first. Higher = act sooner.

How it’s computed (value × EchelonGraph’s weight)
Severity61% × 45%
Impact severity (EG Severity): CVSS 6.1 of 10. Never the KEV-floored or EPSS-lifted EG Score.
Exploitation0.1% × 40%
FIRST EPSS: the 30-day exploitation probability when EchelonGraph scored this CVE.
Automatability0% × 15%
CISA's SSVC Automatable value: no (Vulnrichment).
SSVC (CISA's decision table, applied by EchelonGraph): Track at every mission impact level.
Exploitation none (CISA Vulnrichment) · Automatable no (CISA Vulnrichment) · Technical impact partial (CISA Vulnrichment). All three are CISA's SSVC values (Vulnrichment). EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE.
Action: A fix is referenced, but no release containing it is confirmed. Check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule.
EPSS PROB
0.1%
EPSS %ILE
3rd
KEV
Not listed

What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)

The EG score (6.1): severity, escalated by confirmed exploitation. This CVE's 6.1 is its impact severity (EG Severity), not escalated.

EG Severity
6.1 MEDIUMCVSS-B, impact only: no KEV listing, EPSS or EG-KEV tier raises it.a secondary CVSS source · CVSS v3.0 or v3.1
EG Likelihood
0.1% within 30 daysSource: FIRST EPSS. FIRST's exploitation probability, not an EchelonGraph model.
Confirmed exploitation
None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
EG Priority
SSVC Track at medium mission impactTrack at every mission impact level.CISA BOD 26-04: 60 days if the affected system is publicly exposed; Fix on system upgrade if it is not.No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.Each input and its source, and whom BOD 26-04 binds: the SSVC and BOD 26-04 blocks below.

SSVC (CISA's decision table, applied by EchelonGraph)Track at every mission impact level.

A fix is referenced, but no release containing it is confirmed. Check the referenced fix and the vendor's advisory for a release that contains it; until one is applied, restrict network exposure of the affected system or apply the vendor's mitigation on your normal schedule.

Exploitation none (CISA Vulnrichment) · Automatable no (CISA Vulnrichment) · Technical impact partial (CISA Vulnrichment). All three are CISA's SSVC values (Vulnrichment). EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE. Mission impact is CISA's Mission & Well-being decision point, and only you can judge it. CISA's table makes it high when Mission Prevalence is Essential — the vulnerable component "directly provides capabilities that constitute at least one MEF for at least one entity" (MEF: mission essential function) — or when Public Well-Being Impact is Irreversible: "multiple fatalities are likely", the cyber-physical system "is likely lost or destroyed", "extreme or serious externalities" are imposed on other parties, or social systems such as elections or the financial grid "are destabilized and potentially collapse". CISA's decision table

BOD 26-04 (CISA's remediation timeline, Table 1)60 days if the affected system is publicly exposed; Fix on system upgrade if it is not.

No released fix is confirmed on this page, but CISA's timeline does not wait for a fix's release: it starts when an agency identifies the flaw on an asset and updates the CDM Agency and Federal Dashboard, and the directive counts patching, decommissioning the system or another action as remediation. Until a fixed release is applied, mitigate as this page's verdict says. In the directive's words, “Fix on system upgrade” means that, “unless conditions change”, the vulnerability “should be remediated the next time the vulnerable asset receives a scheduled major upgrade or rebuild”: its timelines are “dynamic as facts change”, and a KEV listing shortens them.

The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA Vulnrichment) · Technical impact partial (CISA Vulnrichment). Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it

Published

October 19, 2026

Last Modified

October 20, 2026

Advisory Details (2)

Auto-updated Oct 19, 2026
Fix referenced — no release confirmed yet. Sources: github_commit, github.
GitHub advisoryMentions a patch (unverified)

Zephyr RTIO syscall verifier validates output parameters for read instead of write access · Advisory · zephyrproject-rtos/zephyr · GitHub

https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-7337-mc44-5wjm
GitHub commit

commit bea934001383 (zephyrproject-rtos/zephyr)

Fix landed in zephyrproject-rtos/zephyr commit bea934001383 — awaiting tagged release

https://github.com/zephyrproject-rtos/zephyr/commit/bea93400138362691403b7f81de1e9048681547d

Weakness Classification(2)

MITRE Common Weakness Enumeration — the root-cause categories this CVE belongs to.

Data Freshness Timeline

(refreshed 8× in last 7d / 20× in last 30d)

Each row is a time one of our pipelines fetched, updated or re-scored this CVE. For example, "NVD update" means NVD published or revised its analysis for this CVE; "MITRE cvelistV5" means we ingested or refreshed it from the CNA feed. An arrow marks a change the record states ("CVSS v3 → 9.1"); EPSS and GHSA rows show the values recorded at that time, not what changed (EPSS values are rounded; hover one for the exact figures). Most recent first.

  1. 2026-11-03 16:47 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  2. 2026-11-02 16:44 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  3. 2026-11-01 16:34 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  4. 2026-10-31 16:32 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  5. 2026-10-30 16:33 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  6. 2026-10-29 16:32 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  7. 2026-10-28 17:55 UTCOSV refresh
  8. 2026-10-28 16:31 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  9. 2026-10-26 16:31 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  10. 2026-10-25 16:32 UTCEPSS rescoreEPSS 0.1% · 3rd percentile
  11. 2026-10-25 14:44 UTCEG score recompute
  12. 2026-10-24 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  13. 2026-10-23 16:31 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  14. 2026-10-21 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  15. 2026-10-20 20:06 UTCEG score recompute
  16. 2026-10-20 19:28 UTCEG score recompute
  17. 2026-10-20 16:32 UTCEPSS rescoreEPSS 0.1% · 1st percentile
  18. 2026-10-19 23:27 UTCEG score recompute
  19. 2026-10-19 22:59 UTCEG score recomputeFirst assessed: 6.1 MEDIUM
  20. 2026-10-19 22:57 UTCMITRE cvelistV5first tracked

Frequently asked(5)

What is CVE-2026-19595?
CVE-2026-19595 is a medium-severity vulnerability; its CVE record was published on October 19, 2026. The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the…
When was the CVE record for CVE-2026-19595 published?
The CVE record for CVE-2026-19595 was published on October 19, 2026. That is the record's publication date; the vulnerability itself may have been made public earlier. EchelonGraph's copy of the record carries a last-modified date of October 20, 2026; the record at its source may have been updated since.
Is CVE-2026-19595 actively exploited?
CVE-2026-19595 is not currently on CISA's Known Exploited Vulnerabilities catalog. FIRST EPSS estimates a 0.1% probability of exploitation in the next 30 days (3rd percentile of EPSS-scored CVEs).
What is the CVSS score of CVE-2026-19595?
CVE-2026-19595 has a CVSS base score of 6.1 (a secondary CVSS source that NVD displays; NVD's own analysis pending).
How do I remediate CVE-2026-19595?
A fix for CVE-2026-19595 is referenced (a reference tagged "Patch", often a source commit), but EchelonGraph has no release containing it on record. Check that reference and the vendor's advisory for a release that contains the fix and update to it; until then, restrict network exposure of the affected system or apply the vendor's mitigation.

Dependency Blast Radius

Explore the affected products and dependency analysis for CVE-2026-19595

Explore →

Is Your Infrastructure Affected by CVE-2026-19595?

EchelonGraph automatically scans your cloud infrastructure and maps CVE exposure using blast radius analysis.