In the Linux kernel, the following vulnerability has been resolved:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
What the EG score is made of (scorer v4.0: the three questions the 0–10 score mixes, published apart · methodology)
The EG score (5.5): severity, escalated by confirmed exploitation. This CVE's 5.5 is its impact severity (EG Severity), not escalated.
- EG Severity
- 5.5 MEDIUMCVSS-B, impact only: no KEV listing, EPSS or EG-KEV tier raises it.GitHub Security Advisory CVSS
- EG Likelihood
- 0.2% within 30 daysSource: FIRST EPSS (model v2026.06.15, score date 2026-11-07). FIRST's exploitation probability, not an EchelonGraph model.
- Confirmed exploitation
- None on record (CISA KEV, EG-KEV Tier 1)Reported apart from the likelihood: an observed fact, not a probability.
- EG Priority
- SSVC Track at medium mission impactTrack at low or medium mission impact; Track* at high (mission-essential systems).CISA BOD 26-04: 14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.Each input and its source, and whom BOD 26-04 binds: the SSVC and BOD 26-04 blocks below.
SSVC (CISA's decision table, applied by EchelonGraph)Track at low or medium mission impact; Track* at high (mission-essential systems).
A fix is available. Apply it within your standard update timelines.
Exploitation none (no CISA value, KEV listing or exploit code on record) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). EchelonGraph holds no SSVC assessment of this CVE from CISA: none of these inputs is from Vulnrichment. EchelonGraph applied CISA's decision table to them; CISA publishes SSVC inputs and the table, not a decision for each CVE. Mission impact is CISA's Mission & Well-being decision point, and only you can judge it. CISA's table makes it high when Mission Prevalence is Essential — the vulnerable component "directly provides capabilities that constitute at least one MEF for at least one entity" (MEF: mission essential function) — or when Public Well-Being Impact is Irreversible: "multiple fatalities are likely", the cyber-physical system "is likely lost or destroyed", "extreme or serious externalities" are imposed on other parties, or social systems such as elections or the financial grid "are destabilized and potentially collapse". CISA's decision table
BOD 26-04 (CISA's remediation timeline, Table 1)14 days if the affected system is publicly exposed; Fix on system upgrade if it is not.
The score's inputs: In CISA KEV no (CISA's KEV catalog) · Automatable no (CISA's BOD 26-04 default) · Technical impact total (CISA's BOD 26-04 default). Where an input reads “CISA's BOD 26-04 default”, no one has published it for this CVE, and CISA's implementation guidance says: “If “Automatable” and “Technical Impact” information items about a CVE ID are not available and the CVE ID is not in the KEV Catalog, CISA will treat its values as “no” and “total,” respectively, until CISA or a third party provides metadata about the CVE ID. CISA will always provide the Vulnrichment data for a CVE ID listed in the KEV Catalog.” Whether your system is publicly exposed is yours to answer. BOD 26-04 binds US Federal Civilian Executive Branch agencies; for anyone else it is CISA's published timeline, a reference rather than an obligation. The directive · how EchelonGraph applies it